How To Use And Preserve Your Wristwatch
How To Use And Preserve Your Wristwatch

Taking good care of a precious and valuable item will help you save a lot of money. We give our car, our house through maintenance, keep them clean, clear, and complete so that they could operate well and look attractive. Therefore, it is no surprise if wristwatches should also be maintained properly, cleaned and put them under check regularly. If you think that you only need to wear them carefully enough, and put them somewhere safe then everything should be okay, then you are wrong ! If you have a cheap watch, or you may have a certain amount of income, you can toss it up and down without worries. You can immediately replace the broken watch with a new one without a problem. However, as a watch lover, you care for them as they are valuable assets, or your watch is very expensive then you should consider finishing the article that Wileverts has presented below!

For Battery Driven Watch (Quartz Watch)

While not using your watch daily, you should avoid placing your watches near items with strong magnetic field, such as: Television, Refrigerator, Speakers, Computer or Laptop, Cellphone, Induction cooker (while turning on) or others wave receiving and transferring machine, because watches’ batteries will drain faster if they are exposed to such types of environment with high magnetic field. Moreover, watches’ Internal circuits (IC) will be magnetized which will cause them to malfunction. You should keep in mind that the batteries must be replaced right after it is used up. Although modern batteries are very well-built, keeping long used-up batteries in your watch can make them rust and hence damage other parts in your watch.

Mechanical Wrist Watches In General (Mechanic, Automatic, Tourbillon)

For watches with Automatic movements or Hand-winding movements, you should avoid adjusting the time, calendar or the winding between 21 to 3 o’clock of every day, because if you perform those actions during that period, you will damage the watch’s wheel system. Moreover, you should not adjust the time anti-clockwise, which means you should not turn crown anti-clockwise (apart from some special brands which allow you to set the top up or down to switch to different time and time zone), this can damage the gears and windings severely. A watch’s mechanism is as same as one from a car, it also needs regular maintenance so that its parts and delicate details cooperate at their fullest, hence helps it perform precisely and increase its lifetime. Periodically, take you watch back to its official agency every two years to have a professional technician maintain and oil it.

Wrist Watches Using Solar Power (Eco-Drive)

For watches with rechargeable solar-powered batteries, if you don’t use them anymore and put them away in a cupboard or closet, away from the sunlight for 3 to 6 months, the watch will stop working. If you want the watch to start running again, you must bring them out to the sun for 15 minutes; your watch will re-start after a moment. However, you should casually put them away, since it will age the battery (which means the battery lifetime will decrease). One other thing is that if expose it for a long time under the hot and bright sunlight, it will damage the leather band.

Stainless-Steel Band Wrist Watch

For Stainless-steel band wrist watch, during you usage it will be dirtied with sweat and dirt. In those situations, you can use toothpaste or liquid hand soap to clean it. Use a toothbrush to brush gently it then washes carefully with water. Finally, use a soft towel to clean it properly. This will help increase the lifetime of you watch. Do not apply any solvents, cleaners, industrial bleaches, adhesives, paints or industrial sprays on the watch’s surface. Firmly close the Adjust button to prevent water from entering the watch while cleaning.

Leather Band Wrist Watch

Nowadays, watches’ bands which are made of leather are beautifully crafted, and with the acre, they can keep their durability in quite a long time (about 12 months). However, because it is of some organic materials, leather band’s lifespan is usually limited due to the effects of the environment, especially moisture – sweat from the owner’s hand. To keep the leather band in right conditions, prevent discoloration and rotting, you should keep them away from places with high-level humidity, do not wear it when you wash your hands, go under the rain or any contact with water. The leather band is complexly constructed, and it can absorb moisture, that’s why you should not let them be in contact with any solvents, cleansers, perfumes, and other types of cosmetics because their chemicals can damage your leather band. When you sight cracking and rotting signs on your leather band, you should change to a new set of a band with similar size right away so as to avoid sudden wrecking of the band and the watch fell to the ground, break or damage parts of the wrist watch.

Gold Plated Wrist Watch

You should keep in mind that sweat is the enemy of the plated layer. Even though advanced technology nowadays can give us a more beautiful and more long lasting layer, you sweat still contains a larger amount of salt. This salt will dull the color of gold when it is in touches the surface. Hence, the surface of your watch will not look as glossy as it used to. This is the reason why you have to bring along a small piece of cotton with your watch to clean it whenever you take it off. This is not only an excellent way to keep your wrist watch shiny all the time but also a good approach to protecting your gold plated layer! On the other hand, if you do not have a chance to take such care of your watch, then every 3 or 4 weeks, you should use soft cotton soaked with warm water to clean your watch to wash away the sweat on your gold plated layer.

Some Other Important Cautions

1- Do not test the durability and anti-scratching of your watch’s Sapphire glass by using objects that are harder than sapphire such as a glass-cutting knife, diamond… because they will scratch the watch’s glass

2- Do not wear your watch while taking a hot bath or sitting in a sauna because it will break the gasket inside the watch, which will eventually reduce the water-resistant ability of the watch.

3- Do not wear your watch while doing heavy works, works that make you hit your watch into many other things, such as mechanic, porterage… because the watch’s coat, glass, and the band will easily be scratched and damaged.

4- Mechanical watches in general (mechanic, automatic, tourbillon) are ingeniously manufactured, with tiny parts which co-operate with each other. For the watch to work stably for a long time, you should not wear it while participating in sports activities such as swimming, soccer, volleyball, tennis… (apart from special-designed sports watches).

Leave a comment